Metal work (processing), manufacturing of
metal parts and components for machine tools

Our Products

Mechanical Mobile horizontal saw for timber production Type FMMBO-3

1. TECHNICAL CHARACTERISTICS

1.1 PRINCIPAL CHARACTERISTICS
  • Maximum diameter of sawn log: 800mm
  • Minimum thickness of sawn board: 5 mm
  • Maximum thickness of sawn board: 400 mm/li>
  • Revolution (speed) of flywheels: 900 rot/min.
  • Medium longitudinal advance speed (according to wood essence): 3m/min
  • Length of the running path from standard endowment of the machine: 9 m
  • Movement of the cutting tape: three-phase electrical engine with 9,2KW x 3000 rot/min power
  • Movement of the advance for board thickness:
    • Coarse adjustment: electrical engine 0.75KW x 1500 rot/min
    • Fine-tuning: manually – 1mm / rot
    • Indicator for vertical board displacement: graded ruler in millimeters
 
1.2 ROLLING MECHANISM
  • Diameter of the rolling roll:80 mm
  • Eccentricity of the roller shaft from nut shaft of the frame: 10 mm
  • Type of rolling roll bearing: radial bearing with single row balls 6205 2RS
 
1.3 CUTTING MECHANISM
  • Diameter of the flywheels: 680 mm
  • Length of the cutting tape: 5000 mm
  • The recommended width of the cutting tape: 60 mm
  • Flywheel scrapers: lever type, with pretention spring, plated with polyamide
  • Tape wiper: lever type, with pretention spring, coated with felt
  • Tape movement rolls: Ø 55 adjustable on two axes
 
1.4 THE VERTICAL MECHANISM OF LIFTING-DESCENDING OF BLADE
  • execution of the advance: screw and nut with square thread Pt 30x4
  • operation: with electrical engine device 0.75 KW/1750 rot/min, with a winch for fine-tuning
  • transmission: with chain, simultaneous on two shafts
  • steering of the support beam of the flywheels: on steering columns made of Ø 45 chrome bar and iron cast nut
 
1.5 COOLING EQUIPMENT OF THE CUTTING TAPE
  • With emulsion, through falling (gravitational)
  • Tank capacity: 10 liters
  • Water flow adjustment: with spherical tap 3/8”
 
1.6MACHINE SIZE
  • Length: 1600 mm
  • Width: 2150 mm
  • Height: 1410 mm

2. STANDARD EQUIPMENT OF THE MACHINE

  • Electrical installation with electrical cabinet IP 5.4
  • Cooling installation with emulsion
  • Electrical cord – 10 m
  • Rolling path – 9 m
  • Blade sharpening device – 1 pcs.
  • Cutting blades – 2 pcs.
  • Grip pliers – 1 pcs.
  • V-belts – 2 pcs.
  • Flywheels wipers
  • Belt wipers
  • Support rolls for belt
  • Wrench for belt stretcher
 

3. OPTIONAL EQUIPMENT

3.1 Equipment for automatic advance, comprised of
  • Frequency converter 0.75 kW
  • Electric device 0.75 kW x 1500 rpm
  • Drive system with chain
  • Source 24 VCC
  • Inductive sensors
 
3.2 Blade lifting-descending mechanism with cutting thickness settings, comprised of
  • Actuator
  • Inductive sensors
  • Programmable automat
  • Touch screen
 
3.3 Principal operation electronic equipment
  • Frequency converter 11kW
  • Electrical cabinet IP 5.4
  • Bipolar safeties
  • Laser barriers

Automatic








Manual